Phytoplankton composition and spatial distribution of copper and zinc in the Fal Estuary (Cornwall,UK)

In the estuaries near Falmouth (Cornwall, UK) levels of dissolved copper and zinc are high, due to drainage of copper and tin mines. Phytoplankton species composition in the autumn of 1989 deviated in the metal-contaminated Restronguet Creek from that in other estuarine branches,viz. Fal, Tresillian and Percuil. In the riverine part of Restronguet Creek (Carnon River)Euglena mutabilis, known as an acidophilic (pH 3) metal-resistant flagellate, occurred at micromolar Cu and Zn, whereas in the clean riversChlamydomonas sp. andOocystis sp. occurred at nanomolar Cu and Zn. An ordination analysis revealed the following patterns in Cu, Zn and phytoplankton species composition in the poly- and euhaline waters. Seston-bound Zn and dissolved Zn were in equilibrium,Katodinium rotundatum is Zn-tolerant, andSkeletonema costatum occurred in water with high contents of Cu in seston. However, none of the variables in these patterns correlated at a significant level (p>0.05). The results show that algae-metal interactions are complicated, and that statistical correlations foundin situ need experimental verification.Communication no. 542 of the Delta Institute for Hydrobiological Research.     

Thermohaemolysis of human erythrocytes in sucrose containing isotonic media

1. 1.|The thermohaemolysis of human erythrocytes in NaCl/sucrose isotonic media can be best accounted for in terms of the colloid-osmotic theory of haemolysis.

2. 2.|The thermohaemolysis in NaCl saline was preceded by leakage of K⁺ and cell swelling. If the inner oncotic osmoactivity was balanced with external sucrose the cells progressively shrinked losing K⁺, but the haemolysis was strongly reduced.

3. 3.|Time dependence of the shrinking of cells and one-step resealed ghosts suspended in isotonic 60 mOsm NaCl/sucrose media was studied between 50 and 58°C.

4. 4.|After a lag period for cells only, this shrinking proceeded with apparently constant rate for cells and ghosts.

5. 5.|The rate constant of shrinking for cells and ghosts obeys the Arrhenius relation, giving the value of 250 ± 15 kJ/mol for the activation energy of shrinking in both cases. This is also the case for the activation energy of the membrane ion permeability constant.

6. 6.|These results are consistent with the thermal inactivation of membrane associated protein(s) acting as a trigger for the ion permeability barrier disturbance.

7. 7.|The mid-point temperature for these membrane events was about 61°C.

Does transpiration have an essential function in long-distance ion transport in plants?

Abstract. Long-term effects of transpiration on growth and on long-distance ion transport were investigated in maize over a whole growth cycle. Maize plants were grown with nutrients supplied at adequate levels in hydroculture or in soil at 50–60% and at >95% relative humidity. Although the amount of water lost by the plants under these conditions differed by a factor 2 to 3, there was neither a decrease in growth (fresh weight and dry weight) nor in ash content of the 'humid'plants. This was also found when the upper part of the shoot (70–150 cm) was tested separately. It is suggested that transpiration is not essential for long-distance transport of mineral elements in plants. Alternatives are discussed.     

Understanding Performance Degradation in Cation‐Disordered Rock‐Salt Oxide Cathodes

The collective redox activities of transition‐metal (TM) cations and oxygen anions have been shown to increase charge storage capacity in both Li‐rich layered and cation‐disordered rock‐salt cathodes. Repeated cycling involving anionic redox is known to trigger TM migration and phase transformation in layered Li‐ and Mn‐rich (LMR) oxides, however, detailed mechanistic understanding on the recently discovered Li‐rich rock‐salt cathodes is largely missing. The present study systematically investigates the effect of oxygen redox on a Li_1.3Nb_0.3Mn_0.4O₂ cathode and demonstrates that performance deterioration is directly correlated to the extent of oxygen redox. It is shown that voltage fade and hysteresis begin only after initiating anionic redox at high voltages, which grows progressively with either deeper oxidation of oxygen at higher potential or extended cycling. In contrast to what is reported on layered LMR oxides, extensive TM reduction is observed but phase transition is not detected in the cycled oxide. A densification/degradation mechanism is proposed accordingly which elucidates how a unique combination of extensive chemical reduction of TM and reduced quality of the Li percolation network in cation‐disordered rock‐salts can lead to performance degradation in these newer cathodes with 3D Li migration pathways. Design strategies to achieve balanced capacity and stability are also discussed.     

A New Electrolyte Formulation for Securing High Temperature Cycling and Storage Performances of Na‐Ion Batteries

The Na‐ion battery is recognized as a possible alternative to the Li‐ion battery for applications where power and cost override energy density performance. However, the increasing instability of their electrolyte with temperature is still problematic. Thus, a central question remains how to design Na‐based electrolytes. Here, the discovery of a Na‐based electrolyte formulation is reported which enlists four additives (vinylene carbonate, succinonitrile, 1,3‐propane sultone, and sodium difluoro(oxalate)borate) in proper quantities that synergistically combine their positive attributes to enable a stable solid electrolyte interphase at both negative and positive electrodes surface at 55 °C. Moreover, the role of each additive that consists in producing specific NaF coatings, thin elastomers, sulfate‐based deposits, and so on via combined impedance and X‐ray photoelectron spectroscopy is rationalized. It is demonstrated that empirical electrolyte design rules previously established for Li‐ion technology together with theoretical guidance is vital in the quest for better Na‐based electrolytes that can be extended to other chemistries. Overall, this finding, which is implemented to 18 650 cells, widens the route to the rapid development of the Na‐ion technology based on Na₃V₂(PO₄)₂F₃/C chemistry.     

Rechargeable Dual‐Ion Batteries with Graphite as a Cathode: Key Challenges and Opportunities

Rechargeable graphite dual‐ion batteries (GDIBs) have attracted the attention of electrochemists and material scientists in recent years due to their low cost and high‐performance metrics, such as high power density (≈3–175 kW kg^?1), energy efficiency (≈80–90%), long cycling life, and high energy density (up to 200 Wh kg^?1), suited for grid‐level stationary storage of electricity. The key feature of GDIBs is the exploitation of the reversible oxidation of the graphite network with concomitant and highly efficient intercalation/deintercalation of bulky anionic species between graphene layers. In this review, historical and current research aspects of GDIBs are discussed, along with key challenges in their development and practical deployment. Specific emphasis is given to the operational mechanism of GDIBs and to unbiased and correct reporting of theoretical cell‐level energy densities.     

Encapsulating Trogtalite CoSe2 Nanobuds into BCN Nanotubes as High Storage Capacity Sodium Ion Battery Anodes

Trogtalite CoSe₂ nanobuds encapsulated into boron and nitrogen codoped graphene (BCN) nanotubes (CoSe₂@BCN‐750) are synthesized via a concurrent thermal decomposition and selenization processes. The CoSe₂@BCN‐750 nanotubes deliver an excellent storage capacity of 580 mA h g^?1 at current density of 100 mA g^?1 at 100th cycle, as the anode of a sodium ion battery. The CoSe₂@BCN‐750 nanotubes exhibit a significant rate capability (100–2000 mA g^?1 current density) and high stability (almost 98% storage retention after 4000 cycles at large current density of 8000 mA g^?1). The reasons for these excellent storage properties are illuminated by theoretical calculations of the relevant models, and various possible Na⁺ ion storage sites are identified through first‐principles calculations. These results demonstrate that the insertion of heteroatoms, B–C, N–C as well as CoSe₂, into BCN tubes, enables the observed excellent adsorption energy of Na⁺ ions in high energy storage devices, which supports the experimental results.     

Zwitterions for Organic/Perovskite Solar Cells,Light‐Emitting Devices,and Lithium Ion Batteries: Recent Progress and Perspectives

Zwitterions, a class of materials that contain covalently bonded cations and anions, have been extensively studied in the past decades owing to their special features, such as excellent solubility in polar solvents, for solution processing and dipole formation for the transfer of carriers and ions. Recently, zwitterions have been developed as electrode modifiers for organic solar cells (OSCs), perovskite solar cells (PVSCs), and organic light‐emitting devices (OLEDs), as well as electrolyte additives for lithium ion batteries (LIBs). With the rapid advances of zwitterionic materials, high‐performance devices have been constructed with enhanced efficiencies by introducing them as interface layers and electrolyte additives. In this review, recent progress in OSCs, PVSCs, OLEDs, and LIBs by using zwitterions is highlighted. The authors also elaborate the role of various zwitterionic materials as interfacial layers and additives for highly efficient OSCs, PVSCs, OLEDs, and LIBs. This article presents an overview of device performance of zwitterionic materials. The structure–property relationship is also discussed. Finally, the prospects of zwitterion materials are also addressed.     

Effect of medicating ingredients and other additives on microflora present on swine and chicken feeds from a Manitoba mill

The occurrence of microfloral components on medicated and non-medicated swine and chicken feed pellets and crumbles, produced in a Manitoba feed mill between June 1991 and October 1992, was determined. Addition of medicates to feeds generally decreased bacterial incidence and increased that of Eurotium spp. fungi. The effect was less pronounced when copper sulphate was added to medicated swine feeds.Contribution No. 1662.     

The effect of CuSO4 for establishing in vitro culture,and the role nitrogen and iron sources in in vitro multiplication of Corylus avellana L. cv. Tonda Gentile Romana

Abstract

In the present work, we have used copper sulphate (CuSO₄·5H₂O) enriched medium for effective control of visible and latent contamination. Among the different concentrations used, 1.25–2.5?mg/L resulted the most appropriate. In addition, the role of different nitrogen source and concentrations (NH₄NO₃ and KNO₃), as different iron source (FeEDTA and FeEDDHA) has been investigated in the proliferation and rooting phases of European hazelnut (cv. Tonda Gentile Romana). The normal concentration of nitrogen present in Murashige and Skoog medium is too high for hazelnut micropropagation cv. Tonda Gentile Romana. A reduction of total nitrogen, accompanied by a reduction of ammonium forms, resulted in a better quality of the shoots. Similar results have been obtained when the common iron source FeEDTA has been replaced by the same concentration of FeEDDHA. An increase in rooting occurs when the amount of nitrogen was reduced in the rooting medium, particularly when the NH₄NO₃ was not present.